DUET CSE 2001-2002 - Previous Year
Reading mode — untimed, no attempt is recorded1. With the help of Thevenin’s theorem, calculate the current flowing through the $3\ \Omega$ resistor in the following network. [নিম্নের নেটওয়ার্কে থেনেনিন থিওরেম প্রয়োগ করিয়া ৩ ওহম রেজিস্টরের মধ্যে প্রবাহিত কারেন্ট বাহির কর।] (10)
Circuit Diagram:
A $24\text{ V}$ source connected to a $4\ \Omega$ series resistor, leading to an $8\ \Omega$ top branch resistor.
A parallel branch featuring a $2\text{ A}$ current source (pointing upwards) connected in parallel with a $4\ \Omega$ resistor between nodes C and D.
A $6\ \Omega$ top branch resistor leads to terminal A.
The load resistor is $3\ \Omega$ connected across terminals A and B, with a load current $I_B$.
মূল চিত্র/ডেটা অসম্পূর্ণ: এই document-এ নির্ভরযোগ্য original circuit image ও সম্পূর্ণ সংযোগ নেই। তাই একক numerical answer নিশ্চিত করা যাচ্ছে না।
- Load resistor সরিয়ে terminal open-circuit voltage Vth বের করো।
- Independent voltage source short এবং independent current source open করে terminal resistance Rth বের করো; dependent source থাকলে রেখে test-source method ব্যবহার করো।
- Load পুনরায় যুক্ত করে নিচের সূত্রে current নির্ণয় করো।
\[I_L=\frac{V_{th}}{R_{th}+R_L}\]
Source solution-এর সংখ্যা যাচাই করতে original circuit, source polarity ও load label প্রয়োজন।
2. Find the reading of the voltmeter in the following circuit. [নিম্নের সার্কিটে ভোল্টমিটারের পাঠ বাহির কর।] (08)
Circuit Diagram:
A $10\text{ V}$ DC source supplying a bridge/parallel network.
Top branch contains a $5\ \Omega$ resistor connected in series with a voltmeter (V) between nodes A and B.
The middle parallel branch contains a $6\ \Omega$ and a $2\ \Omega$ resistor in series.
The bottom return branch contains a $2\ \Omega$ resistor.
মূল চিত্র/ডেটা অসম্পূর্ণ: এই document-এ নির্ভরযোগ্য original circuit image ও সম্পূর্ণ সংযোগ নেই। তাই একক numerical answer নিশ্চিত করা যাচ্ছে না।
Reference node নিয়ে KCL/KVL বা nodal equations solve করতে হবে; তারপর VAB = VA − VB। Ideal voltmeter infinite resistance ধরে current নেয় না। A/B-এর অবস্থান ও source polarity ছাড়া voltage-এর মান/sign নির্ধারিত নয়।
3. Write the equilibrium equations for the following network on nodal basis and obtain the voltages $V_1, V_2, V_3$. All the resisters are of $1\ \Omega$. (08) [নোড ভোল্টেজ প্রক্রিয়ায় নিম্নের নেটওয়ার্কের ভারসাম্য সমীকরণ লিখ এবং $V_1, V_2, V_3$-এর মান নির্ণয় কর। প্রতি রেজিস্টারের মান $1\ \Omega$ ।]
Circuit Diagram:
A $10\text{ V}$ DC voltage source connected to resistor $R_1$ leading to node $V_1$.
Node $V_1$ has a shunt resistor $R_2$ to ground and connects to node $V_2$ via resistor $R_3$.
Node $V_2$ has parallel shunt branches with resistors $R_4$ and $R_5$ to ground, and connects to node $V_3$ via resistor $R_6$.
Node $V_3$ has parallel shunt branches with resistors $R_7$ and $R_8$ to ground.
মূল চিত্র/ডেটা অসম্পূর্ণ: এই document-এ নির্ভরযোগ্য original circuit image ও সম্পূর্ণ সংযোগ নেই। তাই একক numerical answer নিশ্চিত করা যাচ্ছে না।
\[\sum_{j\text{ connected to }i}\frac{V_i-V_j}{R_{ij}}=I_{i,\mathrm{injected}}\]
প্রতিটি 1 Ω branch-এ current = Vi − Vj ampere। তিন node-এর conductance matrix G তৈরি করে GV = I solve করো। কোন nodes connected এবং source directions না জানলে matrix নির্ধারিত নয়।
4. (a) The power factor in an ac circuit is 80% lagging, explain briefly. [একটি এসি সার্কিটে পাওয়ার ফ্যাক্টর ৮০% ল্যাগিং বলিতে কি বুঝ তাহা লিখ।] (04)
\[\cos\phi=0.8,\quad\phi=\cos^{-1}(0.8)=36.87^\circ\]
Sinusoidal circuit-এ current voltage-এর থেকে 36.87° পিছিয়ে থাকে; real power apparent power-এর 80%।
4. (b) Mention the disadvantages of low power factor in a circuit. [এসি সার্কিটে কম পাওয়ার ফ্যাক্টরের অসুবিধাসমূহ উল্লেখ কর।] (04)
একই real power ও supply voltage-এ কম power factor মানে বেশি current। এতে \(I^2R\) loss, voltage drop ও required conductor/transformer kVA rating বাড়ে; system capacity কম কার্যকরভাবে ব্যবহৃত হয়।
5. The admittance of a circuit is $(0.03 - j0.04)\text{ siemens}$. Find the values of the resistance and inductive reactance of the circuit if they are joined (a) in series and (b) in parallel. [একটি সার্কিটের অ্যাডমিটেন্স (0.03-j0.04) লাইমেস (a) সিমেন্স সংযোগ এবং (b) প্যারালাল সংযোগ উভয়ের জন্য সার্কিটের রেজিস্টেন্স ও ইনডাক্টিভ রিয়াক্টেন্স এর মান বাহির কর ।]
\[Z=\frac1{0.03-j0.04}=12+j16\,\Omega\]
Series equivalent: R = 12 Ω, inductive reactance = 16 Ω।
\[Y=\frac1{R_p}-j\frac1{X_{Lp}}\implies R_p=\frac1{0.03}=33.333\,\Omega,\quad X_{Lp}=\frac1{0.04}=25\,\Omega\]
6. A bulb is rated at 100 W and 110 V. Calculate the impedance of a choke which should be connected in series with the bulb
6. (Continued from previous page) so that it may be used on 230 volt ac supply. Find total power and overall p.f. Given the reactance to resistance ratio of the choke is 10. (08) [100 W এবং 110 V রেটেডের একটি ইলেকট্রিক বাল্ব একটি চোক কয়েলের সাথে সিরিজে সংযোগ করিয়া উহাতে 230 V এসি সাপ্লাই প্রয়োগ করা হইল। সার্কিটের মোট পাওয়ার ও পাওয়ার ফ্যাক্টর নির্ণয় কর। চোক কয়েলের রিয়াক্টেন্স ও রেজিস্টেন্সের অনুপাত 10 ।]
\[I=100/110=0.90909\,\mathrm A,\quad X=10R\]
\[(110+IR)^2+(IX)^2=230^2\]
u = IR নিলে:
\[101u^2+220u-40800=0\implies u=19.0391\,\mathrm V\]
\[Z_{choke}=\boxed{20.943+j209.431\,\Omega}\]
\[P_{total}=100+I^2R=\boxed{117.308\,\mathrm W}\]
\[\mathrm{pf}=\frac{110+u}{230}=\boxed{0.5610\text{ lagging}}\]
7. Three impedance of each (15-j20) ohms are connected in delta across a three phase power supply of 400 volts. Determine the active and reactive power of the circuit. [400 ভোল্ট, থ্রি-ফেজ বিশিষ্ট এ.সি. সাপ্লাই সহিত তিনটি ইম্পিডেন্স যাহার প্রতিটির মান (15 - j20) ওহম ডেল্টা আকারে সংযুক্ত আছে, এমন একটি সার্কিটের অ্যাকটিভ ও রিয়াকটিভ পাওয়ার বাহির কর।] (08)
\[Z=15-j20\,\Omega,\quad |Z|=25\,\Omega,\quad |I_p|=400/25=16\,\mathrm A\]
\[P=3I_p^2R=3(16)^2(15)=\boxed{11.52\,\mathrm{kW}}\]
\[Q=3I_p^2X=3(16)^2(-20)=\boxed{-15.36\,\mathrm{kvar}}\]
Negative Q capacitive load নির্দেশ করে; source-এ sign বাদ পড়েছিল।
8. A 4-pole lap-wound generator has 56 coils with 6 turns per coil. The speed is 1150 rpm. What must be the flux per pole in order to generate 265 volts? [একটি 4-পোল, ল্যাপ-উন্ড জেনারেটরের 56টি কয়েল আছে, যাহার প্রত্যেকটি কয়েলে 6 টার্ন এর সংখ্যা 6। উক্ত জেনারেটরের গতি 1150 rpm। 265 ভোল্ট তৈরী করিতে পোল প্রতি ফ্লাক্স কত হইবে।] (08)
\[Z=56\times6\times2=672,\qquad A=P\]
\[\Phi=\frac{60E_g}{ZN}=\frac{60(265)}{672(1150)}=\boxed{0.020575\,\mathrm{Wb}}\]
প্রশ্নের 265 V ব্যবহৃত; source-এর 256 V নয়।
9. A 220 V d.c. shunt motor runs at 500 r.p.m. when the armature current and armature resistance are 50 A and 0.2 for respectively. If the torque is doubled then calculate the speed. [একটি 220 V ডিসি শান্ট মোটর 500 আর. পি. এম এ ঘুরে পরে যখন আর্মেচার কারেন্ট ও আর্মেচার রেজিস্টেন্স যথাক্রমে 50 অ্যাম্পিয়ার এবং 0.2 ওহম। যদি টর্ক দ্বিগুণ হয় তখন উহার গতি নির্ণয় কর।] (08)
Shunt field flux অপরিবর্তিত ধরে \(T\propto I_a\), তাই নতুন armature current 100 A।
\[E_1=220-50(0.2)=210\,\mathrm V,\quad E_2=220-100(0.2)=200\,\mathrm V\]
\[N_2=N_1\frac{E_2}{E_1}=500\frac{200}{210}=\boxed{476.19\,\mathrm{rpm}}\]
10. A 220/440 V transformer has a primary resistance of $0.15\ \Omega$ and reactance of $0.3\ \Omega$ and the corresponding values for the secondary are $0.75\ \Omega$ and $1.5\ \Omega$, respectively. Find the secondary terminal voltage when supplying 10 A at 0.8 p.f. lagging. [একটি 220/440 ভোল্ট ট্রান্সফরমারের প্রাইমারীতে রেজিস্টেন্স 0.15 ওহম ও রিয়াক্টেন্স 0.3 ওহম এবং সেকেন্ডারীতে অনুরূপ মান যথাক্রমে 0.75 ওহম ও 1.5 ওহম। যদি 0.8 পাওয়ার ফ্যাক্টর ল্যাগিং এ সরবরাহকৃত কারেন্ট 10 অ্যাম্পিয়ার হয়, তবে সেকেন্ডারী টার্মিনাল ভোল্টেজ বাহির কর।] (08)
\[a=220/440=0.5,\quad R_{eq,2}=0.75+0.15/a^2=1.35\,\Omega\]
\[X_{eq,2}=1.5+0.3/a^2=2.7\,\Omega\]
\[\Delta V\approx10(1.35\times0.8+2.7\times0.6)=27\,\mathrm V\]
\[V_2\approx440-27=\boxed{413\,\mathrm V}\]
এটি usual approximate regulation calculation; excitation current উপেক্ষা করা হয়েছে।
11. "A 3-phase induction motor develops a starting torque but a single phase induction motor does not develop a starting torque" explain. ["একটি ৩-ফেজ ইন্ডাকশন মোটর স্টার্টিং টর্ক তৈরী করিতে পারে, কিন্তু একটি সিঙ্গেল ফেজ ইন্ডাকশন মোটর স্টার্টিং টর্ক তৈরী করিতে পারে না"- ব্যাখ্যা কর] (08)
Single-phase stator-এর pulsating field-কে সমান দুই বিপরীতমুখী rotating field হিসেবে ধরা যায়। Standstill-এ তাদের torque সমান ও বিপরীত, তাই net starting torque শূন্য। Auxiliary winding/capacitor দিয়ে phase shift করে starting torque তৈরি করা যায়।
Balanced three-phase supply নিজেই rotating magnetic field সৃষ্টি করে; তাই three-phase induction motor self-starting।
12. (a) Why is an alternator rated in KVA? [একটি অল্টারনেটর এর রেটিং কেন KVA তে হয়?] (04)
Alternator-এর heating limit মূলত voltage ও current-এর ওপর নির্ভর করে: core loss voltage/frequency-এর সঙ্গে, copper loss \(I^2R\)-এর সঙ্গে সম্পর্কিত। Load power factor বদলালে kW বদলায়, তাই rating apparent power kVA-এ দেওয়া হয়।
12. (b) Why does a synchronous motor rotate at synchronous speed? [একটি সিনক্রোনাস মোটর কেন সিনক্রোনাস স্পীডে ঘুরে?] (04)
Rotor field stator-এর rotating magnetic field-এর সঙ্গে magnetic locking করে, তাই steady-state speed \(N_s=120f/P\)।
- Damper winding দিয়ে induction-motor starting।
- Pony motor দিয়ে synchronous speed-এর কাছে আনা।
- Variable-frequency drive দিয়ে frequency ধীরে বাড়ানো।
13. (a) Draw a forward biased and a reverse biased diode circuits and also show the characteristics in both cases. [একটি ফরওয়ার্ড বায়াসড ও একটি রিভার্স বায়াসড ডায়োড সার্কিট অংকন কর এবং উভয় ক্ষেত্রে ক্যারেকটারিস্টিক কার্ভ অংকন কর।] (04)
Forward bias: anode positive, cathode negative; series resistor current limit করে। Reverse bias: cathode positive, anode negative; breakdown-এর আগে খুব ছোট leakage।
\[I_D=I_S(e^{V_D/(nV_T)}-1)\]
Forward curve exponential; silicon diode-এর প্রায় 0.7 V একটি circuit approximation, universal threshold নয়। Reverse breakdown rating অতিক্রম করলে current limiting অপরিহার্য।
13. (b) Find the d.c. value of the output voltage waveform of a half wave rectifier. [একটি হাফ ওয়েভ রেকটিফায়ারের আউটপুট ভোল্টেজ ওয়েভফর্মের ডি সি মান নির্ণয় কর।]
(Question 13(b) continued from the previous page):
\[V_{DC}=\frac1{2\pi}\int_0^\pi V_m\sin\theta\,d\theta=\boxed{V_m/\pi}\]
Ideal half-wave rectifier এবং unfiltered resistive load ধরে।
14. Draw the circuit diagram of the Hartley oscillator and explain its principle of operation. [হার্টলী অসিলেটরের সার্কিট ডায়াগ্রাম আঁক এবং ইহার কার্যপ্রণালী ব্যাখ্যা কর।] (06)
Hartley oscillator-এর tank-এ series inductors L1, L2 (বা tapped inductor) capacitor C-এর parallel-এ থাকে। Tap থেকে regenerative feedback amplifier-এ যায়। DC bias amplifier-কে active region-এ রাখে।
\[f_0=\frac1{2\pi\sqrt{C(L_1+L_2+2M)}}\]
Mutual coupling না থাকলে M = 0। Loop phase 0° modulo 360°; start-up-এ loop gain > 1 এবং steady-state amplitude limiting-এ effective gain 1 হয়।
15. Explain how a transistor can act as an amplifier. [একটি ট্রানজিস্টর দ্বারা কিভাবে অ্যাম্প্লিফায়ারের কার্য সম্পাদন হয় বর্ণনা কর।] (08)
Common-emitter BJT-কে active region-এ bias করা হয়: base-emitter forward biased, base-collector reverse biased। Input-এর ছোট পরিবর্তনে collector current বদলায়; collector resistor সেই পরিবর্তনকে বড় output voltage-এ রূপ দেয়।
\[i_c\approx g_m v_{be},\qquad v_o\approx-i_c(R_C\parallel R_L),\qquad A_v\approx-g_m(R_C\parallel R_L)\]
Output input-এর বিপরীত phase-এ থাকে। বাড়তি signal energy DC supply থেকে আসে।
16. Compare a p-channel JFET with an N-channel JFET. [একটি N-চ্যানেল JFET এর সংগে একটি P-চ্যানেল JFET তুলনা কর।] (08)
| বিষয় | N-channel JFET | P-channel JFET |
|---|---|---|
| Majority carrier | Electron | Hole |
| স্বাভাবিক drain polarity | Source-এর তুলনায় positive | Source-এর তুলনায় negative |
| Gate control polarity | VGS সাধারণত zero/negative | VGS সাধারণত zero/positive |
| Mobility | Electron mobility বেশি | Hole mobility কম |
দুটিই normally-on depletion device; gate-channel junction reverse-biased রেখে current নিয়ন্ত্রণ করা হয়।
17. State the functions of bistable, monostable and as table multivibrators. [বাইস্ট্যাবল, মোনোস্ট্যাবল ও অ্যাস্ট্যাবল মাল্টিভাইব্রেটরের কাজ সমূহ উল্লেখ কর।] (08)
Multivibrator হলো switching circuit যা দুই state-এর মধ্যে পরিবর্তিত হয়।
| Type | Stable states | Output / use |
|---|---|---|
| Bistable | 2 | Trigger-এ state বদলায়; memory/latch |
| Monostable | 1 | Trigger-এ একটি নির্দিষ্ট সময়ের pulse; timer |
| Astable | 0 | নিরবচ্ছিন্ন periodic rectangular waveform; clock |
18. A logic circuit has three inputs and one output is 1 when at least two inputs are 1. Design the logic circuit. [একটি লজিক সার্কিটের তিনটি ইনপুট এবং একটি আউটপুট আছে। আউটপুট 1 হয় যখন কমপক্ষে দুইটি ইনপুট 1 হয়। লজিক সার্কিটটি ডিজাইন কর।]
\[Y=AB+AC+BC\]
| A | B | C | Y |
|---|---|---|---|
| 0 | 0 | 0 | 0 |
| 0 | 0 | 1 | 0 |
| 0 | 1 | 0 | 0 |
| 0 | 1 | 1 | 1 |
| 1 | 0 | 0 | 0 |
| 1 | 0 | 1 | 1 |
| 1 | 1 | 0 | 1 |
| 1 | 1 | 1 | 1 |
AB, AC, BC-এর জন্য তিনটি AND gate এবং তাদের output যোগ করতে একটি OR gate ব্যবহার করো।
19. (a) Write the logic symbols and truth tables for AND, NOR, NAND and NOR gates. [AND, XOR, NAND এবং NOR গেইট এর লজিক সিম্বল ও ট্রুথ টেবিলসমূহ লিখ।] (06)
English প্রশ্নে NOR দুবার আছে; Bengali অংশের AND, XOR, NAND, NOR অনুসরণ করা হয়েছে।
| A | B | AND | XOR | NAND | NOR |
|---|---|---|---|---|---|
| 0 | 0 | 0 | 0 | 1 | 1 |
| 0 | 1 | 0 | 1 | 1 | 0 |
| 1 | 0 | 0 | 1 | 1 | 0 |
| 1 | 1 | 1 | 0 | 0 | 0 |
\[AND=AB,\quad XOR=A\oplus B,\quad NAND=\overline{AB},\quad NOR=\overline{A+B}\]
19. (b) Draw a full adder circuit using basic logic gates and show its truth table. [মৌলিক লজিক গেইটসমূহ ব্যবহার করিয়া একটি ফুল অ্যাডার সার্কিট অঙ্কন কর এবং ইহার ট্রুথ টেবিলটি লিখ।] (04)
\[S=A\oplus B\oplus C_{in},\qquad C_{out}=AB+C_{in}(A\oplus B)\]
| A | B | Cin | S | Cout |
|---|---|---|---|---|
| 0 | 0 | 0 | 0 | 0 |
| 0 | 0 | 1 | 1 | 0 |
| 0 | 1 | 0 | 1 | 0 |
| 0 | 1 | 1 | 0 | 1 |
| 1 | 0 | 0 | 1 | 0 |
| 1 | 0 | 1 | 0 | 1 |
| 1 | 1 | 0 | 0 | 1 |
| 1 | 1 | 1 | 1 | 1 |
Circuit: XOR(A,B) → P; XOR(P,Cin) → S; OR(AND(A,B),AND(P,Cin)) → Cout।
20. (a) State the functions of J-K flipflop aand D-flipflop [J-K ফ্লিপফ্লপ এবং D-ফ্লিপফ্লপ এর কাজগুলি উল্লেখ কর।] (04)
| J | K | Q(next) |
|---|---|---|
| 0 | 0 | Q (hold) |
| 0 | 1 | 0 (reset) |
| 1 | 0 | 1 (set) |
| 1 | 1 | NOT Q (toggle) |
D flip-flop: active clock edge-এ Q(next) = D।
20. (b) Draw the circuit diagram of a 3-bit synchronous binary down counter. [একটি 3-বিট সিনক্রোনাস বাইনারী ডাউন কাউন্টার এর সার্কিট ডায়াগ্রাম অংকন কর।] (04)
তিনটি falling-edge বা rising-edge JK flip-flop একই clock-এ চালাও; Q0 least significant bit।
\[J_0=K_0=1,\quad J_1=K_1=\bar Q_0,\quad J_2=K_2=\bar Q_1\bar Q_0\]
Count sequence: 111 → 110 → 101 → 100 → 011 → 010 → 001 → 000 → 111। Common clock থাকার কারণে counter synchronous।
21. Write a program to find the value of y. (use 'C' or Fortran) ['C' অথবা Fortran ব্যবহার করিয়া y এর মান বাহির করার জন্য একটি প্রোগ্রাম লিখ।] (08)
$$y = 3.9.27.81..................... 59049 \ [59049 = 3^{10}]$$
প্রশ্নের dot-গুলো multiplication ধরে:
\[y=3^1\cdot3^2\cdots3^{10}=3^{55}=174449211009120179071170507\]
ফল 64-bit integer-এ ধরে না; decimal digits ব্যবহার করে exact calculation:
#include <stdio.h>
int main(void) {
int d[40] = {1}, len = 1;
for (int k = 0; k < 55; ++k) {
int carry = 0;
for (int i = 0; i < len; ++i) {
int value = 3 * d[i] + carry;
d[i] = value % 10;
carry = value / 10;
}
if (carry) d[len++] = carry;
}
for (int i = len - 1; i >= 0; --i) printf("%d", d[i]);
putchar('\n');
return 0;
}যদি dot দিয়ে যোগ বোঝানো হয়ে থাকে, যোগফল (3^11 − 3)/2 = 88572।
22. Explain with block diagram the difference between microprocessor and microcomputer. [ব্লক ডায়াগ্রাম সহ মাইক্রোপ্রসেসর এবং মাইক্রোকম্পিউটার এর মধ্যে পার্থক্য ব্যাখ্যা কর।] (08)
Microprocessor হলো programmable CPU chip: ALU, control unit ও registers। Microcomputer হলো CPU, memory, I/O এবং interconnection-সহ সম্পূর্ণ computer system।
Block connection: CPU ↔ address/data/control buses ↔ RAM, ROM এবং I/O interfaces ↔ peripherals।
23. (a) Write the name of the factors that influence the speed of computer operation. [যে কারণ গুলি কম্পিউটার কার্যের গতিকে নিয়ন্ত্রণ করে তাহাদের নাম লিখ।] (04)
- CPU architecture, IPC ও clock frequency।
- Core count এবং software-এর parallelism।
- Cache size/latency ও memory bandwidth।
- RAM capacity ও paging pressure।
- Storage ও I/O performance।
- Algorithm, compiler ও workload।
- Thermal/power limits।
23. (b) Draw the diagram of the following LAN topology. [নিম্নেন LAN টপোলজিগুলির ব্লক ডায়াগ্রাম অংকন কর।] (i) Star (ii) Bus (iii) Star-Bus. (04)
| Topology | Connection |
|---|---|
| Star | প্রতিটি computer পৃথক link দিয়ে central switch/hub-এ |
| Bus | এক shared backbone-এ সব node; traditional coax bus-এর দুই প্রান্তে termination |
| Star-bus | একাধিক star group shared backbone দিয়ে যুক্ত |
24. Explain : ব্যাখ্যা কর)-
(i) Database Management and (ii) Operating System. (08)
DBMS হলো database সংজ্ঞা, সংরক্ষণ, query ও পরিবর্তন করার software; এটি integrity, access control, transactions এবং recovery পরিচালনা করে।
Operating system হলো system software যা hardware resource পরিচালনা করে এবং application-এর জন্য service দেয়।
- Process/CPU scheduling ও process coordination।
- Memory allocation, protection ও virtual memory।
- File, storage ও I/O device management।
- User authentication, access control ও system-call interface।
25. Find the content of each register B.C.A. and the output at port I a.let execution of the following program. [নিম্নেন প্রোগ্রামটি এক্সিকিউশনের পর B.C.A রেজিস্টার কনটেন্ট এবং port I এর আউটপুট নির্ণয় কর।] (08)
MVI B. 82H
MVI C. 32H
MOV A.B
ADD C
ORA B
OUT port I
HLT
| Instruction | ফল |
|---|---|
| MVI B,82H | B = 82H |
| MVI C,32H | C = 32H |
| MOV A,B | A = 82H |
| ADD C | A = B4H |
| ORA B | A = B4H OR 82H = B6H |
| OUT port I | Port I = B6H |
শেষে B = 82H, C = 32H, A = B6H।